Roman Goddess Statue Stencil - (size 28.5”w x 71”h)

SKU: AS1318

Availability: In stock

Quick Overview

Stenciling is EASY and INEXPENSIVE.

An ECONOMICAL alternative to wallpaper and vinyl decals - you only need to buy one and you can cover a whole wall.

Suitable for use with ANY TYPE OF PAINT and any stenciling method - use 1 color or a combination of colors and clean up with soapy water.

Made from white translucent Mylar the ORIGINAL stencil film, 7.5 or 10 mil (190 or 250 micron), depending on size.

Use on PAPER PROJECTS, Walls, Floors, Fabrics, Glass, Wood, Cards, and More…

Availability: In stock




If you don’t have the stamina for a whole wall a combination of like stencils can add a bright splash of color. Large stencils make a stunning accent on an empty wall, try them near a sofa or table or even by the skirting board of pretty much any wall space that needs that extra something.

  • Reusable/Reversible
  • Made of 7.5 mil or 10 mil Mylar – the original stencil film
  • Every stencil has detailed STENCILING INSTRUCTIONS


Using laser cut Mylar film and paint; it is easy for even the beginner to produce stencil work of very HIGH QUALITY on Furniture, Walls, Floors, Fabrics, Windows and almost any other flat surface. Also your stencil comes with either registration marks or overlaps for easy line-up.


Stencils can be easily touched up with a little paint or you can simply paint over it and reuse the stencil in a new spot.


Stencils are an ECONOMICAL alternative to wallpaper and vinyl decals - you only need to buy one and you can cover a whole wall.


Virtually any paint can be used to stencil with but the two most popular types are Acrylic and Dry-brush Oil.

  1. Always make sure that the surface to be stenciled is clean and properly prepared with no flaking paint.
  2. Spray the back of the stencil lightly with spray glue and position the stencil on the chalk line or registration mark.
  3. Dip your brush or sponge into the paint then, wipe off most of it on a piece of kitchen paper. If you use too much paint you will find that it bleeds behind the stencil, giving the pattern very ragged edges. Apply the paint using an up and down stippling motion, start on the outside of each of the stencils cut outs and work your way in towards the middle.
  4. Wash your stencil frequently in hot soapy water, especially when changing color. Don't forget to check for paint on the back of the stencil. To remove oil paint and glue from your stencils and brushes soak them in turpentine for a few minutes.


They can be used on Walls, Floors, FABRIC, Glass, Wood, Cards, and almost any flat surface even Exterior walls.

  1. Always prewash fabric to remove size and softener. Tape the fabric to a table, so it doesn’t move and then apply the stencil as per normal; just put some extra masking tape around the edges of the stencil. This is partly to help it stay in place and in case you go over the edge with your paint (you can't get it out of fabric).
  2. Before you can wash the fabric, you have just stenciled, you must heat set it, this can be done with a dry iron (no steam). Allow the paint to dry for 3 days then place a piece of absorbent paper over the design and with the iron as hot as the fabric will allow, press for 10 seconds on either side.

Additional Information


Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.